Mat.No. 1.1191, DIN CK45, AISI 1045

Mat.No.  1.1191, DIN CK45, AISI 1045

Breve descripción:

  Designation by Standards   Mat. No. DIN EN AISI 1.1191 Ck45 C45E 1045   Chemical Composition (in weight %)   C Si Mn Cr Mo Ni V W Others 0.46 max. 0.40 0.65 max. 0.40 max. 0.10 max. 0.40 - - (Cr+Mo+Ni)=max. 0.63   Description 1045 is a medium carbon steel is used when greater strength and hardness is desired than in the “as rolled” condition. Extreme size accuracy, straightness and concentricity combine to minimize wear in high speed appl...


  • Precio FOB: US $ 0.5 - 9.999 / pieza
  • Min.Order Cantidad: 100 pedazos / pedazos
  • Capacidad de la fuente: 10000 pedazos / pedazos por mes
  • Puerto: Shenzhen
  • Condiciones de pago: L / C, D / A, D / P, T / T
  • Detalle del producto

    Preguntas más frecuentes

    Etiquetas de productos

     

    Designación por las Normas

     

    Estera. No. ESTRUENDO ES AISI
    1.1191 CK45 C45E 1045

     

    Composición química (en% en peso)

     

    do Si Minnesota cr Mes Ni V W Otros
    0.46 máx. 0.40 0.65 máx. 0.40 máx. 0.10 máx. 0.40 - - (Cr + Mo + Ni) = max. 0.63

     

    Descripción 1045 is a medium carbon steel is used when greater strength and hardness is desired than in the “as rolled” condition. Extreme size accuracy, straightness and concentricity combine to minimize wear in high speed applications. Turned, ground and polished. Las solicitudes Component parts for vechiles, shafts, bushings, crankshafts, connecting rods and parts for the machine building industry and steel for axes, knives, hammers, etc. Las propiedades físicas (valores avarage) a temperatura ambiente Modulus of elasticity [103 x N / mm 2]: 190-210 Density [g/cm3]: 7.84 Thermal conductivity [W/m.K]: 15.1 Coeficiente de expansión térmica lineal 10 -6  o do-1

     

    20-100 o do 20-200 o do 20-300 o do 20-400 o do 20-500 o do 20-600 o do 20-700 o do
    11.6 12.3 13.1 13.7 14.2 14.7 15.1

     

    Transformación por enfriamiento continuo (CCT) Diagrama Click the image to enlarge the diagram. El recocido suave Heat to 650-700o C, cool slowly. This will produce a maximum Brinell hardness of 207. Endurecimiento Harden from a temperature of 820-850o C, 830 a 860 o C followed by water or oil quenching. La normalización de Normalizing temperature (o C): 840-870 o C.Templado Tempering temperature: See the data bellow. La temperatura de revenido ( o C) vs. Dureza (HRC)

     

    20o do 50o do 100o do 150o do 200o do 250o do 300o do
    56 56 56 54 52 49 45.5

     

    Diagrama de revenido Click the image to enlarge the diagram. Propiedades mecánicas frente al diámetro de

     

    Diámetro Resistencia a la tracción (MPa) Límite elástico (MPa) Alargamiento (%) Reducción de área (%)
    dibujado, barra redonda fría (16-22 mm) 655 585 12 35
    dibujado, barra redonda fría (32-50 mm) 585 515 10 30
    dibujado, barra redonda fría (50-75 mm) 515 485 10 30
    dibujado, barra redonda fría (22-32 mm) 620 550 11 30
    dibujado, barra redonda fría (19-32 mm) 625 530 12 30
    dibujado, recocido, barra redonda fría (19-32 mm) 585 505 12 45
    dibujado, de alta temperatura, el estrés aliviado, barra redonda fría (16-22 mm) 655 515 15 45
    dibujado, de alta temperatura, el estrés aliviado, barra redonda fría (50-75 mm) 550 450 12 35
    dibujado, de alta temperatura, el estrés aliviado, barra redonda fría (32-50 mm) 585 485 15 40
    dibujado, de alta temperatura, el estrés aliviado, barra redonda fría (22-32 mm) 620 515 15 40
    dibujado, baja temperatura, el estrés aliviado, barra redonda fría (22-32 mm) 655 585 11 30
    dibujado, baja temperatura, el estrés aliviado, barra redonda fría (16-22 mm) 690 620 12 35
    dibujado, baja temperatura, el estrés aliviado, barra redonda fría (50-75 mm) 585 515 10 25
    dibujado, baja temperatura, el estrés aliviado, barra redonda fría (32-50 mm) 620 550 10 30
    laminado, barra redonda caliente (19-32 mm) 565 310 16 40
    convertido, suelo y pulido, barra redonda (19-32 mm) 675 405 24 45

     

    La forja Hot forming temperature: 1050-850o C.Maquinabilidad Machinability is good, rated at 80% that of the AISI 1112 alloy used as a 100% machining rated steel. Forms manufactured: Please see the Dimensional Sales Program. Exención de responsabilidad The information and data presented herein are typical or average values and are not a guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other puposes. There is no representation that the recipient of this literature will receive updated editions as the become available. Unless otherwise specified, registered trademarks are property of Metal Ravne company. Copyright 2015 by Metal Ravne. All rights reserved. Contact our Sales Office for more information.

     

  • Anterior:
  • Siguiente:
  • Preguntas contenido

    Envíe su mensaje a nosotros:

    Productos relacionados