Mat.No. 1.1191، DIN Ck45، ايسي 1045

Mat.No.  1.1191، DIN Ck45، ايسي 1045

وصف قصير:

  Designation by Standards   Mat. No. DIN EN AISI 1.1191 Ck45 C45E 1045   Chemical Composition (in weight %)   C Si Mn Cr Mo Ni V W Others 0.46 max. 0.40 0.65 max. 0.40 max. 0.10 max. 0.40 - - (Cr+Mo+Ni)=max. 0.63   Description 1045 is a medium carbon steel is used when greater strength and hardness is desired than in the “as rolled” condition. Extreme size accuracy, straightness and concentricity combine to minimize wear in high speed appl...


  • FOB السعر: US $ 0.5 - 9999 / قطعة
  • مين. وردر الكمية: 100 قطعة / قطعة
  • إنتاج القدرة: 10000 قطعة / قطعة في الشهر
  • الميناء: شنتشن
  • شروط الدفع: L / C، D / A، D / P، T / T
  • تفاصيل المنتج

    التعليمات

    علامات المنتج

     

    تسمية المعايير

     

    حصيرة. لا. DIN EN ايسي
    1.1191 Ck45 C45E 1045

     

    التركيب الكيميائي (وزن٪)

     

    C سي مليون كر مو ني الخامس W الآخرين
    0.46 كحد أقصى. 0.40 0.65 كحد أقصى. 0.40 كحد أقصى. 0.10 كحد أقصى. 0.40 - - (الكروم + مو + ني) = كحد أقصى. 0.63

     

    وصف 1045 is a medium carbon steel is used when greater strength and hardness is desired than in the “as rolled” condition. Extreme size accuracy, straightness and concentricity combine to minimize wear in high speed applications. Turned, ground and polished. تطبيقات Component parts for vechiles, shafts, bushings, crankshafts, connecting rods and parts for the machine building industry and steel for axes, knives, hammers, etc. الخصائص الفيزيائية (قيم أفاراجي) في درجة حرارة الجو المحيط Modulus of elasticity [103 س N / مم 2]: 190-210 Density [g/cm3]: 7.84 Thermal conductivity [W/m.K]: 15.1 معامل التمدد الحراري الخطي 10 -6  س C -1

     

    20-100 س C 20-200 س C 20-300 س C 20-400 س C 20-500 س C 20-600 س C 20-700 س C
    11.6 12.3 13.1 13.7 14.2 14.7 15.1

     

    استمرار التحول التبريد (CCT) رسم بياني Click the image to enlarge the diagram. لينة التليين Heat to 650-700س C, cool slowly. This will produce a maximum Brinell hardness of 207. تصلب Harden from a temperature of 820-850س C، 830-860 س C followed by water or oil quenching. تطبيع Normalizing temperature (س C): 840-870 س C.هدأ Tempering temperature: See the data bellow. هدأ درجة الحرارة ( س C) مقابل صلابة (HRC)

     

    20س C 50س C 100س C 150س C 200س C 250س C 300س C
    56 56 56 54 52 49 45.5

     

    هدأ مخطط Click the image to enlarge the diagram. خصائص ميكانيكية مقابل القطر

     

    قطر الدائرة قوة الشد (باسكال) ينتج قوة (ميغاباسكال) استطالة (٪) تخفيض في المنطقة (٪)
    مسحوبة على البارد، شريط الجولة (16-22 ملم) 655 585 12 35
    مسحوبة على البارد، شريط الجولة (32-50 ملم) 585 515 10 30
    مسحوبة على البارد، شريط الجولة (50-75 ملم) 515 485 10 30
    مسحوبة على البارد، شريط الجولة (22-32 ملم) 620 550 11 30
    مسحوبة على البارد، شريط الجولة (19-32 ملم) 625 530 12 30
    مسحوبة على البارد، صلب، شريط الجولة (19-32 ملم) 585 505 12 45
    مسحوبة على البارد ودرجات الحرارة المرتفعة، والإجهاد بالارتياح، شريط الجولة (16-22 ملم) 655 515 15 45
    مسحوبة على البارد ودرجات الحرارة المرتفعة، والإجهاد بالارتياح، شريط الجولة (50-75 ملم) 550 450 12 35
    مسحوبة على البارد ودرجات الحرارة المرتفعة، والإجهاد بالارتياح، شريط الجولة (32-50 ملم) 585 485 15 40
    مسحوبة على البارد ودرجات الحرارة المرتفعة، والإجهاد بالارتياح، شريط الجولة (22-32 ملم) 620 515 15 40
    البارد تعادل درجة حرارة منخفضة، والإجهاد بالارتياح، شريط الجولة (22-32 ملم) 655 585 11 30
    البارد تعادل درجة حرارة منخفضة، والإجهاد بالارتياح، شريط الجولة (16-22 ملم) 690 620 12 35
    البارد تعادل درجة حرارة منخفضة، والإجهاد بالارتياح، شريط الجولة (50-75 ملم) 585 515 10 25
    البارد تعادل درجة حرارة منخفضة، والإجهاد بالارتياح، شريط الجولة (32-50 ملم) 620 550 10 30
    المدرفلة على الساخن، شريط الجولة (19-32 ملم) 565 310 16 40
    تحولت والبرية ومصقول، شريط الجولة (19-32 ملم) 675 405 24 45

     

    تزوير Hot forming temperature: 1050-850س C.التشغيل في الماكينات Machinability is good, rated at 80% that of the AISI 1112 alloy used as a 100% machining rated steel. Forms manufactured: Please see the Dimensional Sales Program. تنصل The information and data presented herein are typical or average values and are not a guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other puposes. There is no representation that the recipient of this literature will receive updated editions as the become available. Unless otherwise specified, registered trademarks are property of Metal Ravne company. Copyright 2015 by Metal Ravne. All rights reserved. Contact our Sales Office for more information.

     

  • السابق:
  • التالي:
  • التعليمات المحتوى

    إرسال رسالتك لنا:

    منتجات ذات صله