Mat.No. 1.0540, DIN C50, AISI 1050

Designación por las Normas

Composición química (en% en peso)

Descripción C50 is a medium carbon steel is used when greater strength and hardness is desired than in the “as rolled” condition. Las solicitudes Quenched and subsequently tempered steel for screws, forgings, wheel tyres, shafts, sickles, axes, knives, wood working drills, hammers, etc. Las propiedades físicas (valores avarage) a temperatura ambiente Modulus of elasticity [10³ x N / mm ²]: 205 Density [g/cm³]: 7.85 Specific heat capacity[J/g.K]: 0.48 Coeficiente de expansión térmica lineal 10 ^{-6  o} do^-1

El recocido suave Heat to 680-710^o C, cool slowly in furnace. La normalización de Normalizing temperature: 840-880^o C/air. Endurecimiento Harden from a temperature of 820-860^o C followed by water or oil quenching. Templado Tempering temperature: 550-660^o C/air. La forja Hot forming temperature: 1050-850^o C.Maquinabilidad No data. Exención de responsabilidad The information and data presented herein are typical or average values and are not a guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other puposes. There is no representation that the recipient of this literature will receive updated editions as the become available.