Mat.No. 1.1213, DIN de acero Cf53, AISI 1055

Mat.No.  1.1213, DIN de acero Cf53, AISI 1055

Breve descripción:

  Designation by Standards   Mat. No. DIN EN AISI 1.1213 Cf53 - 1055   Chemical Composition (in weight %)   C Si Mn Cr Mo Ni V W Others 0.53 0.25 0.55 - - - - - -   Description Unalloyed structural carbon steel. Applications Steels for superficial hardening: Piston bolts, chain bolts, gear shafts, gear wheels, worms and camshafts. Physical properties (avarage values) at ambient temperature Modulus of elasticity [103 x N/mm2]: 210 Density [g/cm3]: 7.84 ...

  • Precio FOB: US $ 0.5 - 9.999 / pieza
  • Min.Order Cantidad: 100 pedazos / pedazos
  • Capacidad de la fuente: 10000 pedazos / pedazos por mes
  • Puerto: Shenzhen
  • Condiciones de pago: L / C, D / A, D / P, T / T
  • Detalle del producto

    Preguntas más frecuentes

    Etiquetas de productos


    Designación por las Normas


    1.1213 acero Cf53 - 1055


    Composición química (en% en peso)


    do Si Minnesota cr Mes Ni V W Otros
    0.53 0.25 0.55 - - - - - -


    Descripción Unalloyed structural carbon steel. Las solicitudes Steels for superficial hardening: Piston bolts, chain bolts, gear shafts, gear wheels, worms and camshafts. Las propiedades físicas (valores avarage) a temperatura ambiente Modulus of elasticity [103 x N / mm 2]: 210 Density [g/cm3]: 7.84 El recocido suave Heat to 650-700o C, cool slowly. This will produce a maximum Brinell hardness of 223. La normalización de Temperature: 830-860o C.El Estrés Stress relieving to remove machining stresses should be carried out by heating to 120-200o C, holding for one hour at heat, followed by air cooling. This operation is performed to reduce distortion during heat treatment. Endurecimiento Harden from a temperature of 810-845o C followed by oil or water quenching. Hardness after quenching is 57-62 HRC. Templado Tempering temperature: 550-660o C.Propiedades mecánicas en endurecido + revenido


    Diámetro (mm) 0,2% de alargamiento (N / mm 2) Resistencia a la tracción (N / mm 2) Alargamiento (%) Reducción (%)
    hasta 16 510 740-880 12 25
    17-40 430 690-830 14 35
    41-100 400 640-780 15 40


    La forja Hot forming temperature: 1050-850o C.Maquinabilidad No data. Exención de responsabilidad The information and data presented herein are typical or average values and are not a guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other puposes. There is no representation that the recipient of this literature will receive updated editions as the become available.

  • Anterior:
  • Siguiente:
  • Preguntas contenido

    Envíe su mensaje a nosotros:

    Productos relacionados