Mat.No. 1.2341, DIN X6CrMo4
Designation by Standards Brand Name Ravne No. Mat. No. DIN EN AISI CT194 194 1.2341 X6CrMo4 - - Chemical Composition (in weight %) C Si Mn Cr Mo Ni V W Others max. 0.07 max. 0.20 max. 0.20 3.75 0.45 - - - - DescriptionSpecial structural steel. ApplicationsSpecial purpose production. Parts of larger cross-sections where higher toughness is demanded, for gears, crankshafts, etc. Physical properties (avarage values) at ambient temperatureModulus of elasticity [103 x N/...
Designation by Standards
|Brand Name||Ravne No.||Mat. No.||DIN||EN||AISI|
Chemical Composition (in weight %)
|max. 0.07||max. 0.20||max. 0.20||3.75||0.45||-||-||-||-|
Special structural steel.
Special purpose production. Parts of larger cross-sections where higher toughness is demanded, for gears, crankshafts, etc.
Physical properties (avarage values) at ambient temperature
Modulus of elasticity [103 x N/mm2]: 210
Density [g/cm3]: 7.80
Heat to 820-840oC, cool slowly in furnace. This will produce a maximum Brinell hardness of 110.
Harden from a temperature of 840-900oC followed by oil or air quenching. Hardness after quenching is 62 HRC.
Tempering temperature: 200-250oC.
Hot forming temperature: 1050-850oC.
Forms manufactured: Please see the Dimensional Sales Program.
The information and data presented herein are typical or average values and are not a guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other puposes. There is no representation that the recipient of this literature will receive updated editions as the become available.