Mat.No. 1.7131, DIN 16MnCr5, AISI 5115, 5117
Designation by Standards Brand Name Ravne No. Mat. No. DIN EN AISI EC80 718 1.7131 16MnCr5 16MnCr5 5115, 5117 Chemical Composition (in weight %) C Si Mn Cr Mo Ni V W Others 0.16 max. 0.40 1.15 0.95 - - - - - DescriptionAlloyed carbon steel. ApplicationsHigher stressed components – gears, shafts, crankshafts, connecting rods, cam shafts, etc. Physical properties (avarage values) at ambient temperatureModulus of elasticity [103 x N/mm2]: 210 Density [g/cm3]...
Designation by Standards
|Brand Name||Ravne No.||Mat. No.||DIN||EN||AISI|
Chemical Composition (in weight %)
Alloyed carbon steel.
Higher stressed components – gears, shafts, crankshafts, connecting rods, cam shafts, etc.
Physical properties (avarage values) at ambient temperature
Modulus of elasticity [103 x N/mm2]: 210
Density [g/cm3]: 7.81
Thermal conductivity [W/m.K]: 41.0
Electric resistivity [Ohm mm2/m]: 0.16
Specific heat capacity[J/g.K]: 0.46
Coefficient of Linear Thermal Expansion 10-6 oC-1
Heat to 650-700oC, cool slowly.
Harden from a temperature of 860-980oC followed by water, oil or thermal bath quenching.
Tempering temperature: 150-200oC.
Hot forming temperature: 1100-850oC.
Forms manufactured: Please see the Dimensional Sales Program.
The information and data presented herein are typical or average values and are not a guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other puposes. There is no representation that the recipient of this literature will receive updated editions as the become available.