Mat.No. 1.1121، DIN Ck10، ايسي 1010

Mat.No.  1.1121، DIN Ck10، ايسي 1010

وصف قصير:

  Designation by Standards   Mat. No. DIN EN AISI 1.1121 Ck10 - 1010   Chemical Composition (in weight %)   C Si Mn Cr Mo Ni V W Others 0.10 max. 0.40 0.45 - - - - - -   Description CK10 is a plain carbon steel with a nominal 0.10% carbon content. It is a relatively low strength steel but it may be quenched and tempered for increased strength. Applications The low carbon steels, such as CK10, are used for applications such as cold headed fasteners and ...


  • FOB السعر: US $ 0.5 - 9999 / قطعة
  • مين. وردر الكمية: 100 قطعة / قطعة
  • إنتاج القدرة: 10000 قطعة / قطعة في الشهر
  • الميناء: شنتشن
  • شروط الدفع: L / C، D / A، D / P، T / T
  • تفاصيل المنتج

    التعليمات

    علامات المنتج

     

    تسمية المعايير

     

    حصيرة. لا. DIN EN ايسي
    1.1121 Ck10 - 1010

     

    التركيب الكيميائي (وزن٪)

     

    C سي مليون كر مو ني الخامس W الآخرين
    0.10 كحد أقصى. 0.40 0.45 - - - - - -

     

    وصف CK10 is a plain carbon steel with a nominal 0.10% carbon content. It is a relatively low strength steel but it may be quenched and tempered for increased strength. تطبيقات The low carbon steels, such as CK10, are used for applications such as cold headed fasteners and bolts. الخصائص الفيزيائية (قيم أفاراجي) في درجة حرارة الجو المحيط Modulus of elasticity [103 س N / مم 2]: 210 Density [g/cm3]: 7.85 لينة التليين Heat to 800-840س C, cool slowly. تصلب This steel is generally used in the annealed or case hardened condition. It may be heat treated, quenched and tempered but the cost for so doing is generally not worth the result. هدأ Tempering temperature: 320-530س C.تزوير Hot forming temperature: 1050-850س C.التشغيل في الماكينات Machinability of CK10 steel is fairly good, especially in the cold drawn or cold worked condition. Based upon carbon steel AISI 1112 as a reference that is considered 100% machinable (easily machined) the CK10 steel has a rating of 55%. المقاومة للتآكل This is a plain carbon steel and has no corrosion resistance. It will rust unless protected. لحام CK10 steel may be welded by all of the standard welding techniques. العمل الباردة CK10 is easily cold worked by traditional means. Following severe cold working a stress relief, or full, anneal should be performed. تنصل The information and data presented herein are typical or average values and are not a guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other puposes. There is no representation that the recipient of this literature will receive updated editions as the become available.

  • السابق:
  • التالي:
  • التعليمات المحتوى

    إرسال رسالتك لنا:

    منتجات ذات صله