Mat.No. 1.7033, DIN 34Cr4, AISI 5132

Mat.No. 1.7033, DIN 34Cr4, AISI 5132

Short Description:

Designation by Standards Brand Name Ravne No. Mat. No. DIN EN AISI VC130 710 1.7033 34Cr4 34Cr4 5132 Chemical Composition (in weight %) C Si Mn Cr Mo Ni V W Others 0.34 max. 0.40 0.75 1.05 - - - - - DescriptionStructural steel. ApplicationsScrews, dynamically stressed machine parts, etc. Physical properties (avarage values) at ambient temperatureModulus of elasticity [103 x N/mm2]: 210 Density [g/cm3]: 7.85Thermal conductivity [W/m.K]: 43.1 Electric resistivity ...


Product Detail

FAQ

Product Tags

Designation by Standards

Brand Name Ravne No. Mat. No. DIN EN AISI
VC130 710 1.7033 34Cr4 34Cr4 5132

Chemical Composition (in weight %)

C Si Mn Cr Mo Ni V W Others
0.34 max. 0.40 0.75 1.05 - - - - -

Description
Structural steel.

Applications
Screws, dynamically stressed machine parts, etc.

Physical properties (avarage values) at ambient temperature
Modulus of elasticity [103 x N/mm2]: 210 
Density [g/cm3]: 7.85
Thermal conductivity [W/m.K]: 43.1 
Electric resistivity [Ohm mm2/m]: 0.19
Specific heat capacity[J/g.K]: 0.46

Coefficient of Linear Thermal Expansion 10-6 oC-1

20-100oC 20-200oC 20-400oC
11.0 12.5 13.5

Soft Annealing
Heat to 680-720oC, cool slowly. This will produce a maximum Brinell hardness of 223.

Normalizing
Temperature: 850-890oC.

Hardening
Harden from a temperature of 830-870oC followed by water or oil quenching.

Tempering
Tempering temperature: 540-680oC.

Mechanical Properties in Hardening and Tempering Condition

Diameter (mm) 0.2 % proof stress (N/mm2) Tensile strength (N/mm2) Elongation (%) Reduction of area (%) Notch impact energy (ISO-V) (J)
up to 16 700 900-1100 12 35 35
17-40 590 800-950 14 40 40
41-100 460 700-850 15 45 40

Distance From Quenched End in mm

- 1.5 3 5 7 9 11 13 15 20 25 30 35 40 45 50
H max. 57 57 56 54 52 49 46 44 39 37 35 34 33 32 31
H min. 49 48 45 41 35 32 29 27 23 21 20 - - - -
HH max. 57 57 56 54 52 49 46 44 39 37 35 34 33 32 31
HH min. 52 51 49 45 41 38 35 33 28 26 25 24 23 22 21
HL max. 54 54 52 50 46 43 40 38 34 32 30 29 28 27 26
HL min. 49 48 45 41 35 32 29 27 23 21 20 - - - -

Diagram Tempering Temperature – Mechanical Properties


Click the image to enlarge the diagram.

Forging
Hot forming temperature: 1050-850oC. 

Machinability
No data.

Forms manufactured: Please see the Dimensional Sales Program. 

Disclaimer
The information and data presented herein are typical or average values and are not a guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other puposes. There is no representation that the recipient of this literature will receive updated editions as the become available.

  • Previous:
  • Next:
  • FAQ Content

    Send your message to us:

    Related Products