Mat.No. 1.2362, DIN X63CrMoV51

Mat.No. 1.2362, DIN X63CrMoV51

Short Description:

Designation by Standards Mat. No. DIN EN AISI 1.2362 X63CrMoV51 - - Chemical Composition (in weight %) C Si Mn Cr Mo Ni V W Others 0.63 1.10 0.40 5.25 1.0 0.30 - - - Description Cr-Mo alloyed through hardening steel with high tempering resistance. Applications Intermediate rolls for cluster mills, trimming dies, hot cutting shears.  Physical properties (avarage values) at ambient temperature Modulus of elasticity [103 x N/mm2]: 210  Density [g/cm3]: 7.81 Continuous Cooling Tra...


  • FOB Price: US $0.5 - 9,999 / Piece
  • Min.Order Quantity: 100 Piece/Pieces
  • Supply Ability: 10000 Piece/Pieces per Month
  • Port: Shenzhen
  • Payment Terms: L/C,D/A,D/P,T/T
  • Product Detail

    FAQ

    Product Tags

    Designation by Standards

    Mat. No. DIN EN AISI
    1.2362 X63CrMoV51 - -

    Chemical Composition (in weight %)

    C Si Mn Cr Mo Ni V W Others
    0.63 1.10 0.40 5.25 1.0 0.30 - - -

    Description
    Cr-Mo alloyed through hardening steel with high tempering resistance.

    Applications
    Intermediate rolls for cluster mills, trimming dies, hot cutting shears. 

    Physical properties (avarage values) at ambient temperature
    Modulus of elasticity [103 x N/mm2]: 210 
    Density [g/cm3]: 7.81

    Continuous Cooling Transformation (CCT) Diagram


    Click the image to enlarge the diagram.

    Soft Annealing
    Heat to 800-840oC, cool slowly in furnace. This will produce a maximum Brinell hardness of 250.

    Stress Relieving
    Stress relieving to remove machining stresses should be carried out by heating to 600-650oC, holding for one hour at heat, followed by air cooling. This operation is performed to reduce distortion during heat treatment.

    Hardening
    Harden from a temperature of 980-1020oC followed by oil quenching or warm bath quenching. Hardness after quenching is 61-63 HRC.

    Tempering
    Tempering temperature: See the data bellow.

    Tempering Temperature (oC) vs. Hardness (HRC)

    100oC 200oC 300oC 400oC 500oC 550oC
    61 59 58 57 61 58

    Tempering Diagram

    Click the image to enlarge the diagram.

    Forging
    Hot forming temperature: 1100-850oC. 

    Machinability
    No data.

    Forms manufactured: Please see the Dimensional Sales Program.

    Disclaimer
    The information and data presented herein are typical or average values and are not a guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other puposes. There is no representation that the recipient of this literature will receive updated editions as the become available.

  • Previous:
  • Next:
  • FAQ Content

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Truck

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Car