Mat.No. 1.2375, DIN 83CrMoV9

Mat.No. 1.2375, DIN 83CrMoV9

Short Description:

Designation by Standards Mat. No. DIN EN AISI 1.2375 83CrMoV9 - - Chemical Composition (in weight %) C Si Mn Cr Mo Ni V W Others 0.88 0.30 0.38 2.15 0.28 - 0.10 - - Description Low alloyed cold working tool steel. Applications Wear resisting tools, die casting tools, pressing tools for light and heavy metals. This steel grade can be water cooled.  Physical properties (avarage values) at ambient temperature Modulus of elasticity [103 x N/mm2]: 210  Density [g/cm3]: 7.83 Continu...


  • FOB Price: US $0.5 - 9,999 / Piece
  • Min.Order Quantity: 100 Piece/Pieces
  • Supply Ability: 10000 Piece/Pieces per Month
  • Port: Shenzhen
  • Payment Terms: L/C,D/A,D/P,T/T
  • Product Detail

    FAQ

    Product Tags

    Designation by Standards

    Mat. No. DIN EN AISI
    1.2375 83CrMoV9 - -

    Chemical Composition (in weight %)

    C Si Mn Cr Mo Ni V W Others
    0.88 0.30 0.38 2.15 0.28 - 0.10 - -

    Description
    Low alloyed cold working tool steel.

    Applications
    Wear resisting tools, die casting tools, pressing tools for light and heavy metals. This steel grade can be water cooled. 

    Physical properties (avarage values) at ambient temperature
    Modulus of elasticity [103 x N/mm2]: 210 
    Density [g/cm3]: 7.83

    Continuous Cooling Transformation (CCT) Diagram

    Soft Annealing
    Brinell hardness in annealed condition is max. 239.

    Normalizing
    Normalizing temperature: Please ask.

    Stress Relieving
    Stress relieving to remove machining stresses should be carried out by heating to approx. 650oC, holding for 1-2 hours at heat, followed by air cooling. This operation is performed to reduce distortion during heat treatment.

    Hardening
    Please ask.

    Tempering
    Tempering temperature: Please ask.

    Forging
    Hot forming temperature: 1150-850oC. 

    Machinability
    No data.

    Disclaimer
    The information and data presented herein are typical or average values and are not a guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other puposes. There is no representation that the recipient of this literature will receive updated editions as the become available.

     

  • Previous:
  • Next:
  • FAQ Content

    Send your message to us:

    Related Products