Mat.No. 1.1140, DIN Cm15, AISI 1015

Mat.No. 1.1140, DIN Cm15, AISI 1015

Short Description:

  Designation by Standards   Mat. No. DIN EN AISI 1.1140 Cm15 - 1015   Chemical Composition (in weight %)   C Si Mn Cr Mo Ni V W Others 0.15 max.0.40 0.45 - - - - - S=0.020-0.040%   Description CM15 is a plain carbon steel with a nominal 0.15% carbon content and higher content of S (0.020-0.040%). Applications Seamless circular steel tubes for mechanical and general engineering purposes. Non-alloy and alloy steel tubes. Steels for case hardening. Physi...


  • FOB Price: US $0.5 - 9,999 / Piece
  • Min.Order Quantity: 100 Piece/Pieces
  • Supply Ability: 10000 Piece/Pieces per Month
  • Port: Shenzhen
  • Payment Terms: L/C,D/A,D/P,T/T
  • Product Detail

    FAQ

    Product Tags

     

    Designation by Standards

     

    Mat. No. DIN EN AISI
    1.1140 Cm15 - 1015

     

    Chemical Composition (in weight %)

     

    C Si Mn Cr Mo Ni V W Others
    0.15 max.0.40 0.45 - - - - - S=0.020-0.040%

     

    Description
    CM15 is a plain carbon steel with a nominal 0.15% carbon content and higher content of S (0.020-0.040%).

    Applications
    Seamless circular steel tubes for mechanical and general engineering purposes. Non-alloy and alloy steel tubes. Steels for case hardening.

    Physical properties (avarage values) at ambient temperature
    Modulus of elasticity [103 x N/mm2]: 210
    Density [g/cm3]: 7.85

    Soft Annealing
    Heat to 650-700oC, cool slowly in furnace.

    Carburizing
    Carburizing temperature: 880-980oC.
    Cooling from carburizing temperature: water, oil, air, thermal bath.
    Core hardening temperature: 880-920oC.

    Tempering
    Tempering temperature: 150-180oC.

    Forging
    Hot forming temperature: 1050-850oC.

    Machinability
    Machinability of CM15 steel is fairly good, especially in the cold drawn or cold worked condition. Based upon carbon steel AISI 1112 as a reference that is considered 100% machinable (easily machined) the CM15 steel has a rating of 55%.

    Forms manufactured: Please see the Dimensional Sales Program.

    Disclaimer
    The information and data presented herein are typical or average values and are not a guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other puposes. There is no representation that the recipient of this literature will receive updated editions as the become available.

    Unless otherwise specified, registered trademarks are property of Metal Ravne company. Copyright 2015 by Metal Ravne. All rights reserved. Contact our Sales Office for more information.

     

  • Previous:
  • Next:
  • FAQ Content

    Send your message to us:

    Related Products