Mat.No. 1.8070, DIN 21CrMoV5-11
Short Description:
Designation by Standards Brand Name Ravne No. Mat. No. DIN EN AISI PT759 759 1.8070 21CrMoV5-11 - - Chemical Composition (in weight %) C Si Mn Cr Mo Ni V W Others 0.21 0.45 0.45 1.35 1.10 max. 0.30 0.30 - - DescriptionSpecial structural steel. ApplicationsScrews and nuts and forged components for staem engines up to working temperatures of maximum 539oC. Physical properties (avarage values) at ambient temperatureModulus of elasticity [103 x N/mm2]: 210 Density ...
Product Detail
FAQ
Product Tags
Designation by Standards
| Brand Name | Ravne No. | Mat. No. | DIN | EN | AISI |
| PT759 | 759 | 1.8070 | 21CrMoV5-11 | - | - |
Chemical Composition (in weight %)
| C | Si | Mn | Cr | Mo | Ni | V | W | Others |
| 0.21 | 0.45 | 0.45 | 1.35 | 1.10 | max. 0.30 | 0.30 | - | - |
Description
Special structural steel.
Applications
Screws and nuts and forged components for staem engines up to working temperatures of maximum 539oC.
Physical properties (avarage values) at ambient temperature
Modulus of elasticity [103 x N/mm2]: 210
Density [g/cm3]: 7.80
Continuous Cooling Transformation (CCT) Diagram
Click the image to enlarge the diagram.
Time-Temperature Transformation (TTT) Diagram
Click the image to enlarge the diagram.
Soft Annealing
Heat to 650-740oC, cool slowly.
Hardening
Harden from a temperature of 900-950oC followed by oil or air quenching.
Tempering
Tempering temperature: 680-740oC.
Mechanical Properties in Quenched and Tempered Condition
| Diameter (mm) | 0.2 proof stress (N/mm2) | Tensile stregth (N/mm2) | Elongation (%) | Reduction (%) | Notch impact energy (ISO-V) (J) |
| Up to 160 | 540 | 690-830 | 16 | - | 55 |
0.2 Proof Stress (N/mm2) vs. Temperature (oC)
| 200oC | 300oC | 400oC | 500oC |
| 510 | 481 | 431 | 373 |
1% Creep Limit (N/mm2) vs. Temperature (oC)
| Hours | 450oC | 500oC | 540oC |
| 10 000 | 353 | 235 | 120 |
| 100 000 | 275 | 167 | 68 |
Creep Rapture Strength (N/mm2) vs. Temperature (oC)
| Hours | 450oC | 500oC | 540oC |
| 10 000 | 441 | 304 | 180 |
| 100 000 | 343 | 211 | 102 |
Forging
Hot forming temperature: 1100-850oC.
Machinability
No data.
Forms manufactured: Please see the Dimensional Sales Program.
Disclaimer
The information and data presented herein are typical or average values and are not a guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other puposes. There is no representation that the recipient of this literature will receive updated editions as the become available.
FAQ Content
